iGET HOMEGUARD, IP-sikkerhetskamera, Inne & Ute, Koblet med ledninger (ikke trådløs), 40 m, Tak/Vegg, Hvit

Outdoor durable Ultra HD 4K (8MPx) camera iGET HOMEGUARD HGNVK936CAM with two-way audio transmission, color night vision, siren, PoE power supply and SMART motion detection using the built-in PIR detector, is an accessory to the camera set iGET HOMEGUARD HGNVK84904 . 4K resolution (3840 x 2160) for very high quality video, day and night operation, night lighting up to 40 m, dust and splash water resistance IP66. Angle of view 104 °. Angle of view of the PIR detector 120 ° at a distance of 7m. LED lights for warning / lighting. ONVIF support (Ver. 2.6, Profile S, Profile G).

How to connect the camera and PoE power supply
The camera is connected directly to the main NVR recorder via an Ethernet cable. Using this 8-core data cable, the power supply of the camera and data is transmitted. The power supply of the camera is thus fully provided by the NVR recorder. The camera sends data - captured videos to the NVR recorder. It is possible to use an 18m long cable from the package with connectors, it is included in the package for each camera. Or it is possible to connect the whole system to existing wiring. The advantage of existing wiring is that the length of the cable to each camera from the NVR recorder can be up to 100m. The wiring must be from an Ethernet cable, category Cat.5e, Cat.6 or higher.

Innovative SMART motion detection with built-in PIR detector
The main advantage of this camera is a special completely innovative motion detection mode. Thanks to the built-in PIR detector with an angle of view of 120 ° and a range of 7 m, it can recognize which object it concerns. This camera detects important movements - such as the movement of a person, car, large animal, etc. In contrast, classic cameras detect movement only on the basis of optics, which can not accurately recognize the object. With classic technology, the camera detects movement even when falling leaves, rain, sunset, cobwebs, insect movement, etc. In order for this special SMART detection to work, it is necessary to connect this camera to the iGET HOMEGUARD HGNVK84904 set. The PIR detector is located on the camera under the optics.

Easy commissioning
Camera iGET HomeGuard HGNVK936CAM just connect using the supplied Ethernet cable, or your own Ethernet cable to the NVR recorder iGET HomeGuard HGNVK84904 .

High image quality
The camera has a high-quality 1 / 2.3 "8.0 MPx sensor with Ultra HD 3840 x 2160 (4K) resolution, thanks to which you can look forward to a clear and sharp image. The angle of view is 104 °. It captures videos using H.265 compression. The camera has a digital noise reduction 3D DNR, dual stream, and a bit rate of 256kbps - 8Mbps.

Night vision and two-way sound transmission
Thanks to the built-in color IR LED night light in the camera, it can be used continuously day and night, the camera contains backlit IR LEDs with a range of 40 m and additional LED lights for warning. These diodes are hidden under a dark cover on the camera for better design. In addition, audio transmission, includes a microphone and speaker. Thanks to these parameters, it is possible to use the cameras in all areas with zero or reduced visibility.

Universal thanks to ONVIF support
The camera supports the ONVIF protocol for universal connection to other systems. It is thus possible to connect it to any NVR recorder, storage, NAS server that supports the universal and very widespread ONVIF protocol. The camera has an ONVIF version (Ver. 2.6, Profile S, Profile G).