NOK 0,00
(frakt: 0,00)
Nanoxia NXRGBC, Trådløs, Svart, Hvit, Knapper, IR Kabelfri, 12 V, 3x 2 A
Varenr.: [3303685] | Producent: Nanoxia | Model-nr.: NXRGBC | EAN: 4260285296499
Fjernlager
Varen er på fjernlager, leveringstiden er 4-5 hverdager. Mere info
Leveringsalternativer - Velges i kassen
Instabox - Velg din nærmeste pakkeboks
59,00
Bring – Leveres til pakkeboks nær deg
59,00
Bring – Leveres på hentested nær deg
59,00
PorterBuddy - Fleksibel hjemlevering - levert på døren på kvelden
174,00
Bring - Fleksibel hjemlevering - Levering til døren (om kvelden i større byer)
199,00
Vis alle leveringsalternativer (5)
Fraktprisen er basert på levering til dette postnummer:0015 - OSLO Skift postnummer
Oppgi postnummer for levering.
NOK
140,00
eksklusiv MVA 112,00
Totalt inkl. frakt
199,00
Denne funksjonen krever at man er logget inn. Opprett en bruker og liste systemet for å holde styr på fremtidige kjøp eller ønskelister.
Opprett bruker
Login
Opprett bruker
Login
Send på mail
As an optional accessory for our RGB Rigid LED, we offer this practical controller with remote control.
If you want to brighten up your case (or even your living room) with a RGB LED from Nanoxia, you can connect it via a mainboard with a corresponding RGB header – or you can use our controller
Included in the delivery are the controller itself, as well as a handy infrared remote control, to choose between different colors and lighting modes.
The controller is connected to the RGB Rigid LED cable. There are two cables, each 45 cm long, on the controller. One cable ends in an S-ATA power connector to connect the controller to the power supply of a PC. The second cable has the infrared receiver, which can receive the signals from the remote control.
The length of the cables ensures that controllers and IR receivers can be placed in favorable locations in the case, to ensure that the signal reaches the RGB Rigid LED.
If you want to brighten up your case (or even your living room) with a RGB LED from Nanoxia, you can connect it via a mainboard with a corresponding RGB header – or you can use our controller
Included in the delivery are the controller itself, as well as a handy infrared remote control, to choose between different colors and lighting modes.
The controller is connected to the RGB Rigid LED cable. There are two cables, each 45 cm long, on the controller. One cable ends in an S-ATA power connector to connect the controller to the power supply of a PC. The second cable has the infrared receiver, which can receive the signals from the remote control.
The length of the cables ensures that controllers and IR receivers can be placed in favorable locations in the case, to ensure that the signal reaches the RGB Rigid LED.