NOK 0,00
(frakt: 0,00)
BTR E-DAT modul - Overflatemonteringsboks for nettverk - veggmonterbar - CAT 6a - ren hvit, RAL 9010 - 6 porter
Varenr.: [3130081] | Producent: Metz Connect GmbH | Model-nr.: 130861-0602-E | EAN: 4250184115069
Fjernlager
Varen er på fjernlager, leveringstiden er 4-6 hverdager. Mere info
Frakt 69,00 - Instabox - Velg din nærmeste pakkeboks.
Fraktprisen er basert på levering til dette postnummer: - Skift postnummer
Oppgi postnummer for levering.
Se alle alternativer
| Instabox - Velg din nærmeste pakkeboks | 69,00 |
| Bring – Leveres på hentested nær deg | 75,00 |
| PorterBuddy - Fleksibel hjemlevering - levert på døren på kvelden | 159,00 |
| Bring - Fleksibel hjemlevering - Levering til døren (om kvelden i større byer) | 224,00 |
NOK
490,00
eksklusiv MVA 392,00
Totalt inkl. frakt
559,00
Denne funksjonen krever at man er logget inn. Opprett en bruker og liste systemet for å holde styr på fremtidige kjøp eller ønskelister.
Opprett bruker
Login
Opprett bruker
Login
Send på mail
- Surface-mounted, unequipped module housing for individual modules in modul design.
- Solid steel sheet housing.
- Upper part of the housing powder-coated in RAL 9010.
- Upper part of the housing can be put on and removed easily because no screws are used for fastening.
- Equipotential bonding possible by means of contact pin.
- Additional strain relief on lower part of housing using cable ties.
- Suitable for direct wall mounting, as desktop device and for DIN-rail mounting using the DIN rail adapter mini FS.
- Bottom of the 3-port and 4-port housing can be removed. Additional fastening by means of 60 mm fastening clearance.
- Optionally available and fits in all housings: mini splice tray.
- Optionally available 2 x 12 housing: Strain relief for patch cords 130861-24ZE-E.
- Variants: 3, 4, 6, 8, 12, 16 and 2 x 12 ports.
- Solid steel sheet housing.
- Upper part of the housing powder-coated in RAL 9010.
- Upper part of the housing can be put on and removed easily because no screws are used for fastening.
- Equipotential bonding possible by means of contact pin.
- Additional strain relief on lower part of housing using cable ties.
- Suitable for direct wall mounting, as desktop device and for DIN-rail mounting using the DIN rail adapter mini FS.
- Bottom of the 3-port and 4-port housing can be removed. Additional fastening by means of 60 mm fastening clearance.
- Optionally available and fits in all housings: mini splice tray.
- Optionally available 2 x 12 housing: Strain relief for patch cords 130861-24ZE-E.
- Variants: 3, 4, 6, 8, 12, 16 and 2 x 12 ports.