NOK 0,00
(frakt: 0,00)
XtendLAN PETG filament 1,75mm transparent green 1kg
Varenr.: [25972068] | Producent: XtendLan | Model-nr.: 3DF-PETG1.75-TGN 1kg | EAN: 8592457201618
Produktet har ikke et bilde - illustrasjonen viser produktets kategori
Ikke på lager
Varen er ikke på lager.
Utsolgt
Varen er ikke på lager.
Leveringsalternativer - Velges i kassen
Instabox - Velg din nærmeste pakkeboks
59,00
Bring – Leveres til pakkeboks nær deg
59,00
Bring – Leveres på hentested nær deg
59,00
PorterBuddy - Fleksibel hjemlevering - levert på døren på kvelden
174,00
Bring - Fleksibel hjemlevering - Levering til døren (om kvelden i større byer)
199,00
Vis alle leveringsalternativer (5)
Fraktprisen er basert på levering til dette postnummer:0015 - OSLO Skift postnummer
Oppgi postnummer for levering.
NOK
246,00
eksklusiv MVA 196,80
Totalt inkl. frakt
305,00
Gi meg beskjed når varen er på lager igjen.
Denne funksjonen krever at man er logget inn. Opprett en bruker og liste systemet for å holde styr på fremtidige kjøp eller ønskelister.
Opprett bruker
Login
Opprett bruker
Login
Send på mail
XtendLAN PETG filament 1,75 mm transparent green 1 kg
Plastic filament for 3D printing, on a spool. PET-G (Polyethylene Terephthalate Glycol Modified) is a material well known for its plastic bottles. PETG combines the best of ABS and PLA properties for 3D printing. It is a strong and tough material. In terms of durability, the material is close to polycarbonates. It has very little heat shrinkage and is suitable for printing even large objects. It has a high resistance to solvents and acids. It can withstand high and low temperatures. It has very good adhesion to the substrate when 3D printing. The printed object can be heat polished. The filament is vacuum protected and a desiccant bag is present in each package to prevent any moisture from affecting the material. Supplied in cardboard packaging with a window for colour checking.
BASIC SPECIFICATIONS
Fibre material: PET-G
Fibre diameter: 1,75 mm
Recommended extruder temperature: 230 - 250 °C
Recommended pad temperature: 70 - 90 °C
Coil dimensions: 200 mm diameter x 66 mm height (57 mm centre hole diameter)
Weight: 1 kg
Colour: transparent green
Plastic filament for 3D printing, on a spool. PET-G (Polyethylene Terephthalate Glycol Modified) is a material well known for its plastic bottles. PETG combines the best of ABS and PLA properties for 3D printing. It is a strong and tough material. In terms of durability, the material is close to polycarbonates. It has very little heat shrinkage and is suitable for printing even large objects. It has a high resistance to solvents and acids. It can withstand high and low temperatures. It has very good adhesion to the substrate when 3D printing. The printed object can be heat polished. The filament is vacuum protected and a desiccant bag is present in each package to prevent any moisture from affecting the material. Supplied in cardboard packaging with a window for colour checking.
BASIC SPECIFICATIONS
Fibre material: PET-G
Fibre diameter: 1,75 mm
Recommended extruder temperature: 230 - 250 °C
Recommended pad temperature: 70 - 90 °C
Coil dimensions: 200 mm diameter x 66 mm height (57 mm centre hole diameter)
Weight: 1 kg
Colour: transparent green