InLine 44432E, Gigabit Ethernet, 10,100,1000 Mbit/s, 10/100/1000, PoE++ (4PPoE), IEEE 802.3af, IEEE 802.3at, Cat5, Cat5e, Cat6+, Cat6, Cat6a, Cat6e, Cat7, Cat7e, Cat8, Cat8.1

Gigabit PoE extender with 90 W input, 2-port output and IP67 protection

High-performance PoE extender with 90 W input:Supports IEEE 802.3bt and enables multiple devices to be powered via a single network cable
Two PoE outputs rated at 60 W and 30 W:Simultaneously supplies different end devices with the appropriate power via separate ports
No additional power supply required:Operates entirely via PoE, ideal for installations without a local power supply
Robust housing for demanding environments:IP67 and IK10 protection ratings ensure reliable operation in the presence of dust, water and mechanical stress
Ready for use straight away without configuration:Plug-and-play enables rapid integration into existing networks

The Gigabit PoE Extender is used to integrate network connections specifically into existing infrastructures and to expand them flexibly. It is particularly suitable for scenarios where end devices need to be connected over longer distances or where installation points are difficult to access.
The combination of data transmission and power supply via a single cable significantly reduces cabling requirements. This simplifies planning and enables structured implementation, even in more complex installation environments.
The device supports stable Gigabit data transmission and ensures a reliable connection even over longer cable runs. This maintains network performance without the need to operate additional active components in the immediate vicinity of the end devices.
The robust housing is designed for long-term use under demanding conditions. It enables secure installation both indoors and in environments with increased requirements for protection and durability.
The compact design facilitates integration into existing systems and allows for flexible placement along the network route.

1 x RJ45 PoE input, 10/100/1000 Mb/s
2 x RJ45 PoE output, 10/100/1000 Mb/s
PoE standard: IEEE 802.3af, IEEE 802.3at, IEEE 802.3bt
Total PoE output power: 85 W
PoE output: Port 1: 60 W, Port 2: 30 W
PoE pin configuration: 1/2(-), 3/6(+), 4/5(+), 7/8(-)
Supported cables: Cat.5, Cat.5e and higher, up to 100 m
LED indicator: LAN (green)
Input voltage: DC 48–55 V
Surge protection: Differential ±2 kV, common mode ±6 kV
ESD protection: Contact ±6 kV, air ±8 kV
Storage temperature: -40 °C to 80 °C
Operating humidity: 10–90 per cent, non-condensing
Storage humidity: 5–90 per cent, non-condensing
MTBF: > 50,000 hours