NOK 0,00
(frakt: 0,00)
Vivolink 18G HDMI 5 Volt EDID Manager, 60 mm, 54 mm, 17,6 mm, 600 g, 700 g
Varenr.: [25729633] | Producent: VivoLink | Model-nr.: VLHDMICTL3 | EAN: 5715328176355
Fjernlager
Varen er på fjernlager, leveringstiden er 4-5 hverdager. Mere info
Leveringsalternativer - Klikk på et alternativ for å velge
Instabox - Velg din nærmeste pakkeboks
Gratis frakt
Posten Norge – Leveres til pakkeboks nær deg
Gratis frakt
Posten Norge – Leveres på hentested nær deg
Gratis frakt
PorterBuddy - Fleksibel hjemlevering - levert på døren på kvelden
174,00
Posten Norge - Fleksibel hjemlevering - Levering til døren (om kvelden i større byer)
199,00
Vis alle leveringsalternativer (5)
Fraktprisen er basert på levering til dette postnummer:0015 - OSLO Skift postnummer
Oppgi postnummer for levering.
NOK
1.807,00
eksklusiv MVA 1.445,60
Totalt inkl. frakt
1.807,00
Legg til i liste
Denne funksjonen krever at man er logget inn. Opprett en bruker og liste systemet for å holde styr på fremtidige kjøp eller ønskelister.
Send på mail
Help compatible displays wake when HDMI video starts and enter standby when it stops. The VLHDMICTL3 detects video activity using LVDS signal detection and controls HDMI output 5 V accordingly.
Some HDMI sources continue supplying 5 V after video stops, preventing certain displays from entering standby. Installed between the source and display, the VLHDMICTL3 helps resolve this issue and supports automatic wake-up when video returns.
Suitable for laptops and video conferencing systems connected to meeting room TVs or interactive displays.
Key features
One HDMI input and one HDMI output.
Supports 4K60, 4:4:4 and up to 18 Gbit/s.
EDID settings: PASS, 1080P and 4K30.
HDCP settings: Y enables HDCP; N follows the display.
Compact enclosure: 60 × 48.5 × 11.5 mm.
USB-C input for external DC 5 V power when required.
EDID presets define the video format requested from the source. Protected content playback depends on the connected equipment’s HDCP support.
Installation requirements
Automatic wake-up and standby require a compatible display with the relevant settings enabled. The trigger is video activity: a video bar displaying a home screen or screensaver still sends video and may prevent standby. Standby does not disconnect mains power.
External USB-C power is required if the HDMI source cannot supply 300 mA. A 0.5 m USB-A to USB-C power cable is included; a DC 5 V power supply is not included.
Some HDMI sources continue supplying 5 V after video stops, preventing certain displays from entering standby. Installed between the source and display, the VLHDMICTL3 helps resolve this issue and supports automatic wake-up when video returns.
Suitable for laptops and video conferencing systems connected to meeting room TVs or interactive displays.
Key features
One HDMI input and one HDMI output.
Supports 4K60, 4:4:4 and up to 18 Gbit/s.
EDID settings: PASS, 1080P and 4K30.
HDCP settings: Y enables HDCP; N follows the display.
Compact enclosure: 60 × 48.5 × 11.5 mm.
USB-C input for external DC 5 V power when required.
EDID presets define the video format requested from the source. Protected content playback depends on the connected equipment’s HDCP support.
Installation requirements
Automatic wake-up and standby require a compatible display with the relevant settings enabled. The trigger is video activity: a video bar displaying a home screen or screensaver still sends video and may prevent standby. Standby does not disconnect mains power.
External USB-C power is required if the HDMI source cannot supply 300 mA. A 0.5 m USB-A to USB-C power cable is included; a DC 5 V power supply is not included.