Siemens 6ES7143-7BH00-0BB0, 20.4-28.8 V, 0,5 A, 205 mm, 324 g, 255 mm, 90 mm

SIMATIC ET 200clean, DIQ 16x 24 V DC/0.5 A, 8x M12, double assignment, input type 3 (IEC 61131), sink input (PNP, sinking input), input delay 0.05...20 ms, source output (PNP, switching to P potential), substitute value output, channel diagnostics for: open circuit at input, encoder power supply short-circuit, short-circuit at output, MSI, MSO, MRP, S2 redundancy, IM0...4, multi-fieldbus, PN IO, Ethernet IP, Modbus TCP, degree of protection IP69K The SIMATIC ET 200clean has a special hygienic design that allows you to thoroughly clean 360° in a way that is both easy and efficient. The chemically stable housing is resistant to disinfection and cleaning agents and can also withstand cleaning temperatures of up to 80° and a water pressure of 50 bar. The IP69K rating also guarantees that the device is fully protected against the ingress of dust or other particles. This ensures that even hard-to-reach areas can be cleaned thoroughly and that no contaminants accumulate. These properties make the SIMATIC ET 200clean ideal for use in applications where a high level of cleanliness and hygiene is required. This module allows you to connect up to 16 digital inputs or outputs. Thanks to its intelligent design, the device can be mounted directly on the machine, saving space in the control cabinet and complex cable routing. The installation and maintenance effort is low, and the device can be put into operation quickly and conveniently via the TIA Portal. Even when replacing the device, you dont need an additional engineering tool, so the SIMATIC ET 200clean not only impresses with its maximum performance and reliability, but also with its high level of user-friendliness.