NOK 0,00
(frakt: 0,00)
iGET EP9, Sensor- og varselsystem, Hvit, Trådløs, 39 g
Varenr.: [24065925] | Producent: iGET | Model-nr.: 75020609 | EAN: 8594177652312
Produktet har ikke et bilde - illustrasjonen viser produktets kategori
Ikke på lager
Varen er ikke på lager.
Utsolgt
Varen er ikke på lager.
Leveringsalternativer - Velges i kassen
Instabox - Velg din nærmeste pakkeboks
59,00
Bring – Leveres til pakkeboks nær deg
59,00
Bring – Leveres på hentested nær deg
59,00
PorterBuddy - Fleksibel hjemlevering - levert på døren på kvelden
174,00
Bring - Fleksibel hjemlevering - Levering til døren (om kvelden i større byer)
199,00
Vis alle leveringsalternativer (5)
Fraktprisen er basert på levering til dette postnummer:0015 - OSLO Skift postnummer
Oppgi postnummer for levering.
NOK
229,00
eksklusiv MVA 183,20
Totalt inkl. frakt
288,00
Gi meg beskjed når varen er på lager igjen.
Denne funksjonen krever at man er logget inn. Opprett en bruker og liste systemet for å holde styr på fremtidige kjøp eller ønskelister.
Opprett bruker
Login
Opprett bruker
Login
Send på mail
iGET SECURITY EP9 - Wireless sensor for water detection
Wireless water detection sensor for iGET SECURITY M5 alarm. It is used for water detection in bathrooms, utility rooms, tanks, etc., wherever there is a risk of water flooding. Once the detection plate detects water, the transmitter informs the alarm of this. Protection against tampering, highest transmission security of 256bit, very long battery life of 5 years, the alarm constantly monitors the activity of this sensor, also the signal, battery percentage and more.
Easy pairing to the basic alarm set using a QR code. Location distance from the main unit up to 1 km. Workmanship in modern design, environmentally friendly due to low power consumption.
Main parameters:
- The sensor is designed for all locations where it is necessary to report the presence of water using a detection plate,
- simple extension of the basic alarm set, just scan the QR code on the sensor,
- highest wireless transmission encryption 256bit,
- battery life up to 5 years depending on the number of detections,
- sensor distance from the main unit up to 1 km,
- the iGET M5 alarm constantly checks if this sensor is available, also the signal strength and the % of battery in the sensor,
- contains a signal LED - lights up when water is detected, still lights up when the battery is low, also serves as a test button.
Specifications:
Transmitting frequency: 868.35 MHz
Security: 256 bit
Battery life: up to 5 years
Operating temperature: - 20°C ~ +50°C
Operating Humidity: 5% ~ 95%
Power supply: 1x 3V battery, CR123A type
Operating current: up to 100 mA
Quiescent current: 0.015 mA
Contact disconnection: when the detection plate is partially under water
Signal range to the central unit: up to 1 km in line of sight
Sensor weight: 39g including battery
Transmitter dimensions (length x width x depth): 84 x 26 x 22.5 mm
Sensor dimensions (length x width x depth): 30.4 x 26.4 x 10 mm
Cable length from transmitter to detection plate: 220 mm
More information at www.iget.eu
Wireless water detection sensor for iGET SECURITY M5 alarm. It is used for water detection in bathrooms, utility rooms, tanks, etc., wherever there is a risk of water flooding. Once the detection plate detects water, the transmitter informs the alarm of this. Protection against tampering, highest transmission security of 256bit, very long battery life of 5 years, the alarm constantly monitors the activity of this sensor, also the signal, battery percentage and more.
Easy pairing to the basic alarm set using a QR code. Location distance from the main unit up to 1 km. Workmanship in modern design, environmentally friendly due to low power consumption.
Main parameters:
- The sensor is designed for all locations where it is necessary to report the presence of water using a detection plate,
- simple extension of the basic alarm set, just scan the QR code on the sensor,
- highest wireless transmission encryption 256bit,
- battery life up to 5 years depending on the number of detections,
- sensor distance from the main unit up to 1 km,
- the iGET M5 alarm constantly checks if this sensor is available, also the signal strength and the % of battery in the sensor,
- contains a signal LED - lights up when water is detected, still lights up when the battery is low, also serves as a test button.
Specifications:
Transmitting frequency: 868.35 MHz
Security: 256 bit
Battery life: up to 5 years
Operating temperature: - 20°C ~ +50°C
Operating Humidity: 5% ~ 95%
Power supply: 1x 3V battery, CR123A type
Operating current: up to 100 mA
Quiescent current: 0.015 mA
Contact disconnection: when the detection plate is partially under water
Signal range to the central unit: up to 1 km in line of sight
Sensor weight: 39g including battery
Transmitter dimensions (length x width x depth): 84 x 26 x 22.5 mm
Sensor dimensions (length x width x depth): 30.4 x 26.4 x 10 mm
Cable length from transmitter to detection plate: 220 mm
More information at www.iget.eu