NOK 0,00
(frakt: 0,00)
Alphacool 15161, Reservoarholder, Plast, Sort, 2 stykker
Varenr.: [20059977] | Producent: Alphacool | Model-nr.: 15161 | EAN: 4250197151610
Fjernlager (15-24 hverdager)
Varen er på fjernlager, leveringstiden er 15-24 hverdager. Mere info
Leveringsalternativer - Klikk på et alternativ for å velge
Instabox - Velg din nærmeste pakkeboks
59,00
Posten Norge – Leveres til pakkeboks nær deg
59,00
Posten Norge – Leveres på hentested nær deg
59,00
PorterBuddy - Fleksibel hjemlevering - levert på døren på kvelden
174,00
Posten Norge - Fleksibel hjemlevering - Levering til døren (om kvelden i større byer)
199,00
Vis alle leveringsalternativer (5)
Fraktprisen er basert på levering til dette postnummer:0015 - OSLO Skift postnummer
Oppgi postnummer for levering.
NOK
170,00
eksklusiv MVA 136,00
Totalt inkl. frakt
229,00
Legg til i liste
Denne funksjonen krever at man er logget inn. Opprett en bruker og liste systemet for å holde styr på fremtidige kjøp eller ønskelister.
Send på mail
The best Alphacool reservoir mounts of all times!
Many reservoir mounts were designed for the original tube reservoirs from the beginning of the PC water cooling sector. During the last years though, the reservoirs became larger, sized for more capacity and metal was integrated for the end caps. This resulted in heavier reservoirs, making the construction of more sturdy mounts imperative.
With this universal mounting system every tube reservoir with an outer diameter of 50 or 60mm can be mounted safely and securely!
The design is based on hose clamps, which are able to safely seal in pressures of multiple bar with their closed-loop clamping design.
Of course a possibility for LED installation was also implemented. Two slightly pre-drilled holes in the back can be drilled as needed, and nothing stands in the way of spectacular lighting for your reservoir.
Many reservoir mounts were designed for the original tube reservoirs from the beginning of the PC water cooling sector. During the last years though, the reservoirs became larger, sized for more capacity and metal was integrated for the end caps. This resulted in heavier reservoirs, making the construction of more sturdy mounts imperative.
With this universal mounting system every tube reservoir with an outer diameter of 50 or 60mm can be mounted safely and securely!
The design is based on hose clamps, which are able to safely seal in pressures of multiple bar with their closed-loop clamping design.
Of course a possibility for LED installation was also implemented. Two slightly pre-drilled holes in the back can be drilled as needed, and nothing stands in the way of spectacular lighting for your reservoir.